Messages 111 to 120

Code	Description
DRC111E	"The disk image or session file can not reside on the Source drive." You must create a disk image or session file on a drive other than the Source drive.
DRC112E	"Data cannot be copied to the same disk." The Destination must not be the same as the Source.
DRC113E	"Please re-enable the Source drive. Reboot the computer if necessary." The Source drive has gone offline.
DRC114E	"The destination drive does not have the same sector size as the source. (Source: xxx, destination: yyy)." The Source drive can only be copied to a Destination with the same sector size.
DRC115E	"This command requires a license." In demo mode the following commands are not available: Decrypting the destination. Generating a status report of the copy operation.
DRC116E	"No Source." No Source drive was selected.
DRC117E	"You must click on the button Stop to abort the current activity before exiting." You cannot exit the program while a command is in progress. First you must click on "Stop" to abort the current command.
DRC118E	"The Destination drive originally contained <xxx> sectors. It currently contains <yyy> sectors." You are resuming a previous copy operation and the size of the Destination drive is not the same as the original value. This error is most likely caused by the selection of the wrong Destination drive.
DRC119E	"Missing or invalid <field name> in the session file <filename>." The required value is missing in the session file. The file may be corrupt or it may have been created from an older version of Disk Recoup™.
DRC120E	"Sector size mismatch error. The original Source drive was <device-name> with sector size xxx. The currently selected Source drive has sector size yyy." You are resuming a previous copy operation and the sector size of the Source drive is not the same as the original value. This error is most likely caused by the selection of the wrong Source drive.

Table of Contents

Previous | Next